Class 10 SST Manufacturing Industries

AMEND EDUCATION ACADEMY

Classification of Manufacturing Industry

Manufacturing: Production of goods in large quantities after processing the raw materials into more valuable products is called manufacturing.

Importance of Manufacturing

Manufacturing industries help in modernizing agriculture; which forms the backbone of our economy. Apart from this, manufacturing industries also reduce the heavy dependence of people on agricultural income. This becomes possible because of creation of new jobs in secondary and tertiary sectors.

Industrial development helps in eradication of unemployment and poverty.

Export of manufactured goods expands trade and commerce and brings in much needed foreign exchange.

A country with high level of manufacturing activities becomes prosperous.

Contribution of Industry to National Economy

The share of manufacturing sector in the GDP (Gross Domestic Product) has been stagnant at 17% over the last two decades. The total contribution of industry to the GDP is 27% out of which 10% comes from mining, quarrying, electricity and gas.

The growth of the manufacturing sector had been 7% in the last decade. Since 2003, the growth rate has been 9 to 10% per annum. The desired growth rate over the next decade is 12%.

The National Manufacturing Competitiveness Council (NMCC) has been set with the objectives of improving productivity through proper policy interventions by the government and renewed efforts by the industry.

Industrial Location

Some of the factors which affect the industrial location are as follows:

Availability of raw materials

Availability of labour

Availability of capital

Availability of power

Availability of market

Infrastructure

Sometimes, industries are located in or near cities. Cities provide markets and also provide services like banking, insurance, transport, labour, consultants, etc. Many industries tend to come together to make use of the advantages of an urban centre. Such centre is then called as agglomeration economy.
In the pre-independence period, most of the manufacturing units were located in places which were near the ports, e.g. Mumbai, Kolkata, Chennai, etc. As a result, these belts developed as industrial urban centres surrounded by huge agricultural rural hinterland.

Classification Of Industries:

On the basis of raw materials:

Agro Based Industries: Cotton, woolen, jute, silk textile, rubber, sugar, tea, coffee, etc.

Mineral Based Industries: Iron and steel, cement, aluminium, petrochemicals, etc.

According to their main role:

Basic or Key Industries: These industries supply their products or raw materials to manufacture other goods, e.g. iron and steel, copper smelting, aluminium smelting.

Consumer Industries: These industries produce goods which are directly used by consumers, e.g. sugar, paper, electronics, soap, etc.

On the basis of capital investment:

Small Scale Industry: If the invested capital is upto Rs. one crore, then the industry is called a small scale industry.

Large Scale Industry: If the invested capital is more than Rs. one crore, then the industry is called a large scale industry.

On the basis of ownership:

Public Sector: These industries are owned and operated by government agencies, e.g. SAIL, BHEL, ONGC, etc.

Private Sector: These industries are owned and operated by individuals or a group of individuals, e.g. TISCO, Reliance, Mahindra, etc.

Joint Sector: These industries are jointly owned by the government and individuals or a group of individuals, e.g. Oil India Limited.

Cooperative Sector: These industries are owned and operated by the producers or suppliers of raw materials, workers or both. The resources are pooled by each stakeholder and profits or losses are shared proportionately. AMUL which is milk cooperative is a good example. The sugar industry in Maharashtra is another example.

Based on the bulk and weight of raw materials and finished goods:

·  Heavy Industries: Iron and steel.

·  Light Industries: Electronics

Textile Industry

The textile industry contributes 14% to industrial production in India. In terms of employment generation, this industry is the second largest after agriculture. 35 million persons are directly employed in the textiles industry in India. The contribution of textiles industry to GDP is 4%. This is the only industry in the country which is self-reliant and complete in the value chain.

Cotton Textiles: Cotton textiles were traditionally produced with hand spinning and handloom weaving techniques. Power-looms came into use after the 18th century. During the colonial period, the competition of mill-made cloth from England destroyed the Indian textiles industry.

At present, there are 1600 cotton and synthetic textile mills in India. Almost 80% of them are in the private sector. The rest are in the public sector and cooperative sector. Additionally, there are several thousand small factories with four to ten looms

Location of Cotton Textile Industry: This industry was earlier concentrated in the cotton belt of Maharashtra and Gujarat. Availability of raw materials, port facilities, transport, labour, moist climate, etc. were in favour of these locations. The industry provides a source of livelihood to farmers, cotton boll pluckers and workers engaged in ginning, spinning, weaving, dyeing, designing, packaging, tailoring and sewing. This industry supports many other industries; like chemical and dyes, mill stores, packaging materials and engineering works.

Spinning still continues to be centralized in Maharashtra, Gujarat and Tamil Nadu. However, weaving is highly decentralized and there are many weaving centres in the country.

Production of fabric in India by various sectors
Sector	Share of production	Loomage
Mills	6%	1.33 lakh
Powerloom	54.17%	14 lakh
Handloom	23%	NA

India exports cotton yarn to Japan. Cotton goods are also exported to USA, UK, Russia, France, East European countries, Nepal, Singapore, Sri Lanka and African countries.

At around 34 million, India has the second largest installed capacity of spindles in the world; after China. India accounts for one fourth of the world trade in cotton yarn. However, India’s share in garment trade in the world is only 4%. Our spinning mills are globally competitive and can use all the fibres we produce. But the weaving, knitting and processing units cannot use much of the high quality yarn produced in the country.

Problems in cotton textile industry: Erratic power supply and obsolete machinery are the major problems. Low output of labour and stiff competition; with the synthetic fibre are the other problems.

Jute Textiles

India is the largest producer of raw jute and jute goods in the world. It is the second largest exporter of jute; after Bangladesh. Most of the 70 jute mills in India are located in West Bengal; mainly along the bank of Hooghly. The jute industry is in a narrow belt which is 98 km long and 3 km wide.

Location advantages of Hooghly basin: Proximity of the jute producing areas, inexpensive water transport, good rail and road network, abundant water for processing raw jute and cheap labour from West Bengal, Bihar, Orissa and Uttar Pradesh.

The jute industry directly supports 2.61 lakh workers. It also supports 40 lakh small and marginal farmers who are engaged in cultivation of jute and mesta.

Jute industry is facing challenge from synthetic fibre and also from other competitors like Bangladesh, Brazil, Philippines, Egypt and Thailand. But the internal demand has been rising because of government policy of mandatory use of jute packaging. The National Jute Policy was formulated in 2005 with an objective to increase productivity, improve quality and ensure good prices for the jute farmers. Due to growing global concern for environment friendly and biodegradable material; the future of jute looks bright. USA, Canada, Russia, UAE, UK and Australia are the main markets

Sugar Industry

India is the second largest producer of sugar in the world. It is the largest producer of gur and khandsari. There are over 460 sugar mills in the country. They are spread over Uttar Pradesh, Bihar, Maharashtra, Karnataka, Tamil Nadu, Andhra Pradesh, Gujarat, Punjab, Haryana and Madhya Pradesh. Sixty percent mills are in UP and Bihar. This industry is seasonal and hence is more suited to the cooperative sector.
In recent years, there has been a growing tendency to shift and concentrate in the southern and western states; especially in Maharashtra. The cane produced in this region has higher sucrose content. The cooler climate of this region ensures a longer crushing season.
Challenges for Sugar industry: Seasonal nature of industry, old and inefficient methods of production, transport delay and the need to maximize the use of baggase are the major challenges for this industry.

Mineral Based Industries

Iron and Steel Industry

Iron is required for making machineries for all other industries hence it is the basic industry. Due to this, production and consumption of steel is often regarded as the index of a country’s development.
India is 9th among the world crude steel producers and produces 32.8 million tons of steel. India is the largest producer of sponge iron. But per capita consumption of steel is only 32 kg per annum.
At present, there are 10 primary integrated steel plants in India. Additionally, there are many mini steel plants in the country. SAIL (Steel Authority of India Limited) is the major public sector company in this sector, while TISCO (Tata Iron and Steel Company) is the major private sector company in this industry.
Most of the iron and steel industries are in the Chhotanagpur plateau region. This region has plenty of low cost iron ore, high grade raw materials, cheap labour and good connectivity through railways and roadways.

Reasons for underperformance of Iron and steel Industry in India:

• High cost and limited availability of coking coal
• Low productivity of labour
• Erratic energy supply
• Poor infrastructure

Aluminium Smelting

Aluminium smelting is the second most important metallurgical industry in India. Aluminium is often turned into alloy and then used for making various products.
There are 8 aluminium smelting plants in India, located in Orissa (NALCO and BALCO), West Bengal, Kerala, Uttar Pradesh, Chhattisgarh, Maharashtra and Tamil Nadu. India produced over 600 million tones of aluminium in 2004.

Chemical Industries

The chemical industry contributes about 3% to the GDP. The chemical industry of India is the third largest in Asia and is at twelfth position in the world.
Inorganic Chemicals: Sulphuric acid, nitric acid, alkalies, soda ash and caustic soda are the inorganic chemicals. Sulphuric acid is used to manufacture fertilisers, synthetic fibres, plastics, adhesives, paints, dye stuffs. Soda ash is used to make glass, soaps and detergents, paper, etc.
Organic Chemicals: These include petrochemicals. Petrochemicals are used for manufacturing synthetic fibres, synthetic rubber, plastics, dye-stuffs, drugs and pharmaceuticals. Organic plants are located near oil refineries or petrochemical plants.
The chemical industry is usually its own largest consumer.

Fertiliser Industry

Fertiliser industry is centred around the production of nitrogenous fertilisers, phosphatic fertilisers and ammonium phosphate and complex fertilisers. Complex fertilisers have a combination of nitrogen (N), phosphate (P) and potash (K). Potash is entirely imported because India does not have any reserves of commercially viable potash or potassium compounds.
India is the third largest producer of nitrogenous fertilisers. There are 57 fertiliser units which manufacture nitrogenous and complex nitrogenous fertilisers. Out of them, 29 units manufacture urea and 9 manufacture ammonium sulphate as by-product. There 68 small units which produce single superphosphate.

Cement Industry

Cement industry requires bulky raw materials like limestone, silica, alumina and gypsum. There are many cement plants in Gujarat because of proximity to ports.
There are 128 large and 323 mini cement plants in India.
Improvement in quality has found the Indian cement a readily available market in East Asia, Middle East, Africa and South Asia. This industry is doing well in terms of production as well as export.

Automobile Industry

Almost all types of vehicles are manufactured in India. After liberalization in 1991, many automobile manufacturers set up their base in India. With the launch of contemporary models, India became an attractive market for automobiles. At present, there are 15 manufacturers of cars and multi-utility vehicles, 9 of commercial vehicles, 14 of two and three-wheelers. Delhi, Gurgaon, Mumbai, Pune, Chennai, Kolkata, Lucknow, Indore, Hyderabad, Jamshedpur, Bangalore, Sanand, Pantnagar, etc. are the major centres of automobile industry.

Information Technology and Electronics Industry

Bangalore is often termed as the electronic capital of India. Mumbai, Pune, Delhi, Hyderabad, Chennai, Kolkata, Lucknow and Coimbatore are the other important centres. There are 18 software technology parks in the country and they provide single window service and high data communication to software experts.
This industry had generated a large number of employments. Upto 31 March 2005, over one million persons were employed in the IT industry. Because of fast growth of BPO (Business Process Outsourcing); this sector has been a major earner of foreign exchange.

Industrial Pollution and Environmental Degradation

Air Pollution: High proportion of carbon dioxide, sulphur dioxide and carbon monoxide create air pollution. Suspended particulate matters also create problems. Smoke is emitted from chimneys of various factories. Some industry also pose the risk of leak of hazardous chemicals; the way it happened during the Bhopal Gas Tragedy. Air pollution has adverse effect on human health, animals, plants, buildings, and the atmosphere as a whole.
Water Pollution: Organic and inorganic industrial wastes and effluents cause water pollution. Paper, pulp, chemical, textile, dyeing, petroleum refineries, tanneries, etc. are the main culprits of water pollution.
Thermal Pollution of water: It occurs when hot water from factories or thermal plants is drained into rivers and ponds before cooling. This plays havoc with the aquatic life.
Radioactive Waste: Waste from nuclear power plants contains highly radioactive materials and it needs to be properly stored. Any leakage of radioactive material can cause short term and long term damages to humans as well as to other life forms.
Noise Pollution: Noise pollution can result in constant irritation, hypertension and hearing impairment. Factory equipments, generators, electric drills, etc. are the major sources of noise pollution.

Preventing Environmental Degradation by Industry:

• Water should be reused and recycled in the industry. This will help in minimizing the use of freshwater.
• Rainwater harvesting should be promoted.
• Hot water and effluents should be treated before being released in rivers and ponds.

1.      What are basic industries? Give an example.
Answer: The basic industries supply their products or raw materials to manufacture other goods, e.g. iron and steel, copper smelting, aluminium smelting.

2.      Name the important raw materials used in the manufacturing of cement?
Answer: Limestone, silica, alumina and gypsum

3.      How are integrated steel plants different from mini steel plants? What problems does the industry face? What recent developments have led to a rise in the production capacity?
Answer: An integrated steel plant does all the activities involved in the value chain of steel manufacturing. Such plant begins from making steel from iron ore and end up in making steel products which are needed by the industry. Mini steel plants, on the other hand, buy finished steel from larger plants and produce various goods from that; like utensils, tools, etc.

4.      How do industries pollute the environment?
Answer: Industries mainly pollute the air and water. Factories emit smoke which contains harmful gases. These gases cause air pollution. Factories produce effluents and release them into rivers and pond. Thus, water pollution is cause by factories. Many factories; like thermal power plant; also cause thermal pollution of water by releasing hot water into rivers and ponds. Additionally, factories also play a major role in soil pollution.

5.      Discuss the steps to be taken to minimise environmental degradation by industry?
Answer:Preventing Environmental Degradation by Industry:

• Water should be reused and recycled in the industry. This will help in minimizing the use of freshwater.
• Rainwater harvesting should be promoted.
• Hot water and effluents should be treated before being released in rivers and ponds.
• Chimneys should be fitted with electrostatic precipitators to prevent release of suspended particulate matters.